Furniture Backing
Ultra-thin backing material for furniture and cabinet component production.
Thin MDF Board · 0.8 mm
0.8mm Ultra-Thin MDF Board
factory-direct supply.
Source 0.8mm ultra-thin MDF for furniture backing, decorative processing and buyer-specified applications with factory-direct export support from China.
Technical Specifications
Product information
for buyer review.
Thickness0.8 mm
Board Size1220 x 2440 mm / 1240 x 2460 mm
Density RequirementReviewed according to thickness, application and production feasibility
Surface CharacteristicsFine sanded faces prepared for lamination, coating and other surface-processing requirements.
Processing CharacteristicsUltra-thin panel suited to precision cutting, backing, lamination and lightweight component fabrication.
Buyer Specification ReviewConfirm the 0.8mm thickness, board size, density, surface requirement, downstream process and bundle protection before quotation.
Export PackagingUltra-thin boards are protected on the faces and edges, reinforced in bundles and prepared for container handling.
Export CapabilityFactory-direct specification review, export packing and shipment coordination through Tianjin Port, China.
Order-specific tolerances and processing requirements must be confirmed during quotation review.
01
Product Overview
0.8 mm
Thin MDF Board.
0.8mm thin MDF is the lowest-thickness specification in Xinyao Wood's production range. It is reviewed for applications that require a lightweight, smooth and consistently thin base panel for subsequent processing.
The continuous pressing MDF production line and annual capacity of 300,000 m³ support planned orders and repeat supply programs.
Final thickness, size, density, surface and packaging requirements are confirmed before production.
Typical Applications
Where 0.8 mm
thin MDF is reviewed.
Application suitability depends on the confirmed board specification and downstream process.
Surface Lamination
Smooth base board for decorative film and surface-processing review.
Lightweight Components
Low-thickness panel for interior and fabricated furniture components.
Precision Processing
Thin board for model, packaging and application-specific cutting requirements.
Representative Batch Inspection
Measured 0.8 mm MDF data
for buyer reference.
Report XY-QC-260722 · 0.8 mm x 1220 mm x 2440 mm · Produced July 22, 2026 · 4 sheets sampled from 700 sheets · Inspection basis: GB/T 31765-2015
Length and width deviationRequirement: +/-2.0 mm/m · Batch result: 1.0 mm/m
Nominal thickness deviationRequirement: +/-0.08 mm · Batch result: 0.05 mm
Within-panel thickness deviationRequirement: +/-0.05 mm/m · Batch result: 0.03 mm/m
Static bending strength (MOR)Requirement: >=42 MPa · Batch result: 86.98 MPa
Modulus of elasticity (MOE)Requirement: >=3800 MPa · Batch result: 4782 MPa
Surface bonding strengthRequirement: >=1.2 MPa · Batch result: 3.49 MPa
Internal bonding strengthRequirement: >=1.2 MPa · Batch result: 4.03 MPa
Moisture contentRequirement: 3.0-13.0% · Batch result: 5.20%
DensityRequirement: >=800 kg/m3 (allowed +/-10%) · Batch result: 997 kg/m3
Within-panel density deviationRequirement: +/-10.0% · Batch result: +1.7% / -2.3%
Thickness swelling after water absorptionRequirement: <=30% · Batch result: 26.18%
Formaldehyde release (extraction method)Requirement: <=5 mg/100g · Batch result: 2.33 mg/100g
These manufacturer-issued results relate to one representative 0.8 mm production batch. They are provided as reference data, not as guaranteed specifications for every order. Contract limits, sampling and test requirements must be confirmed before production.
Buyer Concerns
Requirements for
repeat orders.
01
Thickness Consistency - Board thickness is checked against the confirmed order specification.
02
Surface Smoothness - Sanded surfaces are reviewed for the intended processing or lamination requirement.
03
Stable Supply - Production planning supports repeat orders and agreed shipment schedules.
04
Export Packaging - Board faces and edges are protected and bundles are reinforced for container handling.
Quality Assurance
Inspection before
shipment.
Finished-board checks are carried out against confirmed order requirements.
Thickness Inspection
Finished-board thickness is measured against the confirmed specification.
Density Testing
Density is reviewed for board structure and application requirements.
Surface Inspection
Board faces are checked for sanding and finished-surface condition.
Final Shipment Inspection
Product specifications and packaging condition are reviewed before loading.
0.8 mm Thin MDF Inquiry
Request specification
and quotation.
Send board size, density, surface, quantity, application and destination port for factory review.
Request MDF Quotation